![S100 Computers](../../../Header/S100_Banner.jpg)
California Computer Systems -
2016B 16K RAM Board
This was a relatively late 16K
static RAM board to appear on the S-100 scene.
![CCS 16K RAM](16K RAM.jpg)
This board utilized 2114 RAM chips which
were available in 200, 300, or 450 nano sec at the time. 4K memory blocks
individually addressable to any 4K Boundary was possible. Bank
selection by Bank Port and Bank Byte was possible. The board could be set to be
bank dependent or bank independent. LED's Indicated the Board Active and Bank
Active States. There was a wait state switch for slow memories and a
phantom line. The board could be selected or deselected by the power on clear
signal. The board was designed to meet all the IEEE-696 standard requirements.A very nice RAM diagnostic program was
supplied with the board and is described in the manual.
The manual for this board can be
obtained
here.
Other California Computer
Systems S-100 Boards
16K RAM
2065 64K RAM
2066 64K RAM
FDC
Z80 CPU
SIO
Serial & Parallel
Other Boards
This page was last modified
on
01/08/2011